Howto/Spacenet/Juniper Trapeze example

From SpaceFED
Jump to: navigation, search

Example for Juniper/Trapeze controller.

Add RADIUS profile

Trapeze1.png

Add service profile

Trapeze2.png

Trapeze3.png

Trapeze4.png

CLI

set service-profile spacenet ssid-name spacenet
set service-profile spacenet rsn-ie cipher-ccmp enable
set service-profile spacenet rsn-ie enable
set service-profile spacenet attr vlan-name GUESTS
set radius server bitlair address 192.168.88.11 timeout 5 retransmit 3 deadtime 5 encrypted-key <key>
set server group rad members bitlair
set authentication dot1x ssid spacenet ** pass-through rad